tel:
+86 16651737187email:
shanyf@chinasti.comSDP series Low pressure test chamber can provide high temperature, low temperature, altitude, humidity and other environmental simulation conditions, used in aviation, aerospace, automobile, shipbuilding, military, information, electronics and other fields of environmental test or reliability test.
| Model | 702S | 702SH | 705S | 705SH | 710S | 710SH | 720S | 720SH | |
| Volume | L | 280(210) | 630(504) | 1210(1000) | 2460(2016) | ||||
| Inner Depth | mm | 500 | 700 | 1000 | 1200 | ||||
| Inner Width | mm | 600 | 800 | 1000 | 1200 | ||||
| Inner Height | mm | 700 | 900 | 1000 | 1400 | ||||
| Outer Depth | mm | 2660 | 2865 | 3415 | 3615 | ||||
| Outer Width | mm | 1000 | 1200 | 1400 | 1600 | ||||
| Outer Height | mm | 1620 | 1950 | 2020 | 2320 | ||||
| Temperature Performance Parameters | |||||||||
| Temperature Range | ℃ | -70~150 | |||||||
| Heating Time | min | 20℃ → Max. Temperature ≤ 60min (Empty Load) | |||||||
| Cooling Time | min | 20℃ → Min. Temperature ≤ 60min (Empty Load) | |||||||
| Temperature Change Rate | ℃/min | 1℃/min (-55~+85℃, linear) | |||||||
| Load (Aluminum ingots) | kg | 10 | 25 | 25 | 25 | ||||
| Heating Power | W | 5 | 12 | 15 | 18 | ||||
| Temperature Fluctuations | ℃ | ≤1 | |||||||
| Temperature Uniformity | ℃ | ≤2 | |||||||
| Temperature Deviation | ℃ | ≤±2 | |||||||
| Pressure Performance Parameters | |||||||||
| Ultimate Pressure | kPa | 1 | |||||||
| Pressure Reducionig Time | min | Atmospheric→1kPa≤45min | |||||||
| Pressure Recovery | kPa/min | ≤10 | |||||||
| Pressure Deviation | Atmospheric~40kPa: ≤±2kPa; 4kPa~40kPa: ≤±5%kPa; Less than 4 kPa: ≤±0.1kPa | ||||||||
| Temperature and Humidity Climate Parameters | |||||||||
| Temperature Range | ℃ | 20~85 | |||||||
| Humidity Range | %RH | 20~98 | |||||||
| Temperature Fluctuations | ℃ | ≤1 | |||||||
| Temperature Gradient | ℃ | ≤1 | |||||||
| Temperature Deviation | ℃ | ±2 | |||||||
| Humidity Fluctuations | %RH | ≤2 | |||||||
| Humidity Deviation | %RH | +2/-3%RH(Humidity>75%RH), ±5%RH(Humidity≤75%RH) | |||||||
| Humidity Uniformity | %RH | ≤2 | |||||||
| Heating Power | kW | 4.5 | 4.5 | 9 | 9 | ||||
| Vacumn Pump | kW | 0.55(SV16B) | 0.55(SV16B) | 0.9(SV25B) | 1.5(SV40B) | ||||
| Power Supply | AC380V 50Hz TN-S | ||||||||
| Maximum Current | A | 40 | 40 | 60 | 60 | 72 | 72 | 95 | 95 |
| Total Power | kW | 16 | 20 | 30 | 34.5 | 41 | 50 | 51 | 60 |
| Noise | Db(A) | ≤75 | |||||||
| Cooling Water Flow | m³/h | 3 | 3 | 4.5 | 4.5 | 10 | 10 | 15 | 15 |
| Total Weight | kg | 950 | 1050 | 1400 | 1500 | 1800 | 1900 | 2600 | 2800 |